Technical Data Sheet · Version 1.0 · Issued 02 July 2026
Technical Data Sheet
Sodium Peroxide
Zenco Chemicals LtdCategory: Cleaning & Disinfection
DOC REFERENCE
Version: 1.0
Issue: 02 July 2026
Revised: 02 July 2026
CONFIDENTIAL — VIEW ONLY
1
Product Description
Sodium Peroxide (Na2O2, CAS 1313-60-6) is a powerful inorganic oxidizing agent presented as a yellow to yellowish solid. It is widely used across Kenya, Uganda, Tanzania, and Rwanda in bleaching textiles and paper, chemical synthesis, water treatment, and disinfection. It releases oxygen upon moisture contact and is valuable in manufacturing, mining, and chemical processing industries. The product should be handled with protective gear and stored in cool, dry, well-ventilated conditions away from moisture and combustible materials to ensure safety and efficacy.
2
Chemical Composition
| Component | CAS Number | % w/w |
|---|---|---|
| Sodium Peroxide (Na2O2) | 1313-60-6 | ≥ 85% (typical industrial grade) |
| Sodium Hydroxide (NaOH) | 1310-73-2 | ≤ 10% (minor impurities) |
| Moisture | 7732-18-5 | ≤ 1% |
3
Physical & Chemical Properties
| ph | Alkaline when dissolved, approx. 11-13 |
| odour | Odorless |
| colour | Yellow to yellowish |
| viscosity | Not applicable (solid) |
| appearance | Yellow to yellowish solid |
| solubility | Reacts vigorously with water, releasing oxygen |
| flash point | Non-flammable but strong oxidizer |
| boiling point | Decomposes before boiling |
| specific gravity | 2.31 g/cm³ |
4
Performance Data & Dosage
| contact time | Varies by use case, usually several minutes to hours |
| compatibility | Alkaline stable materials, Glass, Stainless steel (grade 316 or higher) |
| dilution ratio | Depends on application; cautious addition to water is recommended |
| incompatibility | Water (vigorous reaction), Organic materials, Acids, Combustible substances, Reducing agents |
| recommended dosage | Consult product label or technical support for specific applications |
| treatment temperature | Typically ambient to 60°C, depending on process |
5
Applications & Industries
Applications
- Textile bleaching
- Water treatment
- Chemical synthesis
- Industrial oxidizing agent
- Disinfection
Industries Served
ManufacturingWater treatmentTextile industryMiningChemical processing
6
Health & Safety (GHS)
03Oxidising05Corrosive
Signal Word: Danger
Hazard Class: Oxidizing solids (Category 1), Skin corrosion/irritation (Category 1B), Serious eye damage/eye irritation (Category 1)
Hazard Statements:
- H271: May cause fire or explosion; strong oxidizer.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
PPE Required:
Chemical resistant gloves Safety goggles or face shield Protective clothing Respiratory protection if dust generated
first aid skin
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing. Seek medical attention.
first aid eyes
Rinse immediately with plenty of water for at least 15 minutes, lifting eyelids occasionally. Get urgent medical attention.
first aid ingestion
Do NOT induce vomiting. Rinse mouth and seek immediate medical attention.
7
Storage & Handling
| disposal | Dispose of according to local regulations. Do not release into environment. Neutralize appropriately. |
| shelf life | Consult product label |
| container material | Sealed drums made from compatible materials such as steel with appropriate coatings |
| storage conditions | Cool, dry, well-ventilated area away from moisture, heat sources, and incompatible materials |
| storage temperature | Store below 30°C |
8
Packaging & Transport
25 kg drum50 kg drum200 kg drum
| un number | 1475 |
| packing group | II |
| transport class | 5.1 (Oxidizing substances) |
9
Standards & Compliance
✓ KEBS Certification (Kenya Bureau of Standards)✓ ISO 9001 Quality Management System Certification
| Standard | Scope |
|---|---|
| KEBS KS EAS 301 | Chemical products — General specifications for oxidizers |
| ISO 9001 | Quality management systems applicable to chemical supply |
10
Frequently Asked Questions
Is bulk discounting available?
Yes, we offer tiered pricing for orders exceeding 500kg. Contact sales for custom quotes.
What is the minimum order quantity?
Standard MOQ is 25kg. Exceptions available for established clients.
How should Sodium Peroxide be stored?
Store in a cool, dry, well-ventilated place away from moisture and incompatible materials.
Is technical support available for product use?
Yes, Zenco Systems Ltd provides expert application guidance for all customers.
Zenco Chemicals Ltd — https://zencochemicals.comTDS-SODIUM-PEROXIDE-IN-KENYA-UGANDA-TANZANIA · v1.0 · 02 July 2026FOR TECHNICAL REFERENCE ONLY
Want a downloadable copy of this datasheet?
Contact our technical team and we will send you the full official PDF directly to your inbox.
Related Products
Explore our range of industrial chemicals including oxidizing agents, water treatment chemicals, and specialty chemical supplies to support your manufacturing and processing needs across East Africa.