Technical Data Sheet · Version 1.0 · Issued 02 July 2026
Technical Data Sheet
HDPE (High-Density Polyethylene)
Zenco Chemicals LtdCategory: Rubber & Plastic
DOC REFERENCE
Version: 1.0
Issue: 02 July 2026
Revised: 02 July 2026
CONFIDENTIAL — VIEW ONLY
1
Product Description
HDPE, or High-Density Polyethylene, is a thermoplastic polymer widely used across industries. It is chemically represented as (C2H4)n where n indicates polymerization degree. HDPE is a solid, white to off-white granular or pelletized material known for its high strength-to-density ratio. Additionally, its excellent chemical resistance and durability make it ideal for manufacturing pipes, containers, and packaging materials. Furthermore, HDPE is commonly employed in the production of industrial films, geomembranes, and household goods. Zenco Systems Ltd supplies HDPE across Kenya, Uganda, Tanzania and Rwanda, ensuring quality and reliability for diverse industrial needs. Moreover, businesses in East Africa count on Zenco Systems Ltd for their polymer raw materials due to our strong supply chain reach extending through Burundi, South Sudan, Ethiopia, Somalia, and the Democratic Republic of the Congo. This thermoplastic's resistance to impact, moisture, and chemicals reduces downtime and maintenance. HDPE should be stored in dry, cool conditions away from direct sunlight to preserve its polymer integrity. Proper handling recommends avoiding exposure to open flames or excessive heat to prevent degradation. As a result, Zenco Systems Ltd remains the preferred HDPE supplier in East Africa, combining quality assurance, regional logistics expertise, and competitive pricing.
2
Chemical Composition
| Component | CAS Number | % w/w |
|---|---|---|
| High-Density Polyethylene | 9002-88-4 | ≥ 99% |
3
Physical & Chemical Properties
| ph | Neutral |
| odour | Odorless |
| colour | White to off-white |
| viscosity | N/A (solid thermoplastic polymer) |
| appearance | White to off-white granules or pellets |
| solubility | Insoluble in water |
| flash point | Consult product label |
| boiling point | Decomposes before boiling |
| specific gravity | 0.94–0.97 g/cm³ |
4
Performance Data & Dosage
| contact time | Not applicable |
| compatibility | Compatible with most chemicals except strong oxidizing agents, Compatible with aluminum, stainless steel for processing |
| dilution ratio | Not applicable |
| incompatibility | Strong oxidizing agents, Open flames or excessive heat |
| recommended dosage | Consult product label |
| treatment temperature | -40°C to 80°C (temperature stable range) |
5
Applications & Industries
Applications
- Packaging materials
- Industrial piping
- Containers and bottles
- Plastic films
- Geomembranes
Industries Served
ManufacturingPackagingConstructionAgricultureWater Treatment
6
Health & Safety (GHS)
Signal Word: None
Hazard Class: Not classified as hazardous under GHS Rev.9
Hazard Statements:
PPE Required:
Protective gloves Safety glasses Dust mask where dust generation occurs
first aid skin
Wash with soap and water if irritation occurs due to dust
first aid eyes
Rinse cautiously with water for several minutes if dust enters eyes
first aid ingestion
Consult medical attention if large quantities ingested; unlikely due to polymer form
7
Storage & Handling
| disposal | Dispose of in accordance with local regulations; recyclable where facilities exist |
| shelf life | 24 months when stored under recommended conditions |
| container material | Polypropylene or polyethylene bags, 25kg; steel or plastic drums, 200L |
| storage conditions | Store in cool, dry place away from direct sunlight and heat sources |
| storage temperature | Store below 30°C |
8
Packaging & Transport
25kg bags200L drums
| un number | N/A (not classified as hazardous material) |
| packing group | N/A |
| transport class | Not regulated |
9
Standards & Compliance
✓ KEBS Certification for Polymer Raw Materials (Kenya Bureau of Standards)✓ ISO 9001:2015 Quality Management (Zenco Systems Ltd Internal Certification)
| Standard | Scope |
|---|---|
| KEBS KS EAS 1703:2019 | Plastics — Polyethylene — Classification and symbols |
| ISO 1872-2:2013 | Plastics — Polyethylene (PE) — Part 2: Preparation of test specimens and determination of properties |
| ASTM D1248 - 21 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
10
Frequently Asked Questions
What is the typical packaging for HDPE?
HDPE is commonly packaged in 25kg bags or 200L drums.
Can HDPE be used for food-grade applications?
Yes, HDPE is approved for many food packaging uses.
Is bulk shipping available to Uganda and Tanzania?
Yes, Zenco Systems Ltd supplies bulk orders across East Africa.
How should HDPE be stored to maintain quality?
Store in cool, dry, and shaded conditions to preserve quality.
Does Zenco Systems Ltd offer technical support for HDPE?
Yes, expert support is provided for all HDPE supply needs.
Zenco Chemicals Ltd — https://zencochemicals.comTDS-HDPE-IN-KENYA-UGANDA-TANZANIA · v1.0 · 02 July 2026FOR TECHNICAL REFERENCE ONLY
Want a downloadable copy of this datasheet?
Contact our technical team and we will send you the full official PDF directly to your inbox.
Related Products
Explore additional raw materials and polymers for industrial manufacturing in East Africa, including LDPE, polypropylene, and PVC supplied by Zenco Systems Ltd.