Technical Data Sheet · Version 1.0 · Issued 02 July 2026
Technical Data Sheet
Diethylene Glycol
Zenco Chemicals LtdCategory: Solvents & Thinners
DOC REFERENCE
Version: 1.0
Issue: 02 July 2026
Revised: 02 July 2026
CONFIDENTIAL — VIEW ONLY
1
Product Description
Diethylene Glycol is a colorless, odorless, and hygroscopic liquid widely used in East African industrial applications. Its chemical identity is C4H10O3 with CAS Number 111-46-6. This solvent is miscible with water and many organic solvents, serving as a raw material for manufacturing resins, plasticizers, brake fluids, cosmetics, detergents, antifreeze, and hydraulic fluids. Zenco Chemicals supplies this product across Kenya, Uganda, Tanzania, Rwanda, and neighboring East African countries, ensuring consistent quality and competitive pricing. Proper handling and storage are essential due to health hazards from ingestion or inhalation. The product is transported safely under recommended conditions with a boiling point of approximately 245°C and flash point of 154°C.
2
Chemical Composition
| Component | CAS Number | % w/w |
|---|---|---|
| Diethylene Glycol | 111-46-6 | ≥ 99% |
3
Physical & Chemical Properties
| ph | Neutral (approximately 7) |
| odour | Slightly sweet odor |
| colour | Colorless |
| viscosity | Consult product label |
| appearance | Colorless transparent liquid |
| solubility | Completely miscible with water and many organic solvents |
| flash point | Approx. 154°C (closed cup) |
| boiling point | Approx. 245°C |
| specific gravity | 1.12 g/cm³ at 20°C |
4
Performance Data & Dosage
| contact time | Consult product label |
| compatibility | Water, Resins, Plasticizers, Brake fluids, Cosmetic formulations, Detergents, Hydraulic fluids |
| dilution ratio | Consult product label |
| incompatibility | Strong oxidizers, Strong acids, Strong bases |
| recommended dosage | Depends on application; consult technical datasheet or supplier |
| treatment temperature | Consult product label |
5
Applications & Industries
Applications
- Solvent for resins and plasticizers
- Cosmetic and detergent formulation
- Brake fluid production
- Antifreeze and hydraulic fluids
- Intermediate in chemical synthesis
Industries Served
ManufacturingCosmeticsDetergentsAutomotiveChemical processing
6
Health & Safety (GHS)
07Harmful08Health
Signal Word: Warning
Hazard Class: Acute Toxicity - Oral (Category 4), Acute Toxicity - Dermal (Category 5), Specific Target Organ Toxicity - Single Exposure (Category 3)
Hazard Statements:
- H302: Harmful if swallowed
- H313: May be harmful in contact with skin
- H335: May cause respiratory irritation
PPE Required:
Protective gloves Safety goggles Protective clothing Respiratory protection if ventilation is insufficient
first aid skin
Wash affected area thoroughly with soap and water. Remove contaminated clothing.
first aid eyes
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention if irritation persists.
first aid ingestion
Do NOT induce vomiting. Rinse mouth and seek medical advice immediately.
7
Storage & Handling
| disposal | Dispose of contents/container in accordance with local/regional/national regulations. Avoid environmental release. |
| shelf life | Consult product label |
| container material | Compatible with high-density polyethylene (HDPE) or stainless steel containers |
| storage conditions | Store in tightly sealed containers away from moisture, heat, and direct sunlight. Keep in a cool, dry, well-ventilated area. |
| storage temperature | Store at ambient temperature, ideally below 30°C |
8
Packaging & Transport
25kg drums50kg drums200L drums
| un number | NA1993 |
| packing group | III |
| transport class | 9 – Miscellaneous dangerous substances and articles |
9
Standards & Compliance
✓ ISO 9001:2015 Certified Manufacturing and Supply✓ KEBS Certified Product
| Standard | Scope |
|---|---|
| KEBS KS EAS 196:2016 | Industrial Chemicals - Quality Requirements and Testing |
| ISO 9001:2015 | Quality management systems - Requirements |
10
Frequently Asked Questions
Is bulk discounting available for Diethylene Glycol?
Yes, we offer tiered pricing for orders exceeding 500kg. Contact sales for quotes.
What is the minimum order quantity?
The standard minimum order quantity is 25kg for most industrial chemicals.
What industries commonly use Diethylene Glycol?
It is widely used in manufacturing, cosmetics, detergents, and antifreeze production.
How should Diethylene Glycol be stored?
Store in sealed containers away from heat and moisture in a cool, dry place.
Are there safety precautions when handling this chemical?
Yes, use protective gloves and avoid ingestion or inhalation for safe handling.
Zenco Chemicals Ltd — https://zencochemicals.comTDS-DIETHYLENE-GLYCOL-IN-KENYA-UGANDA · v1.0 · 02 July 2026FOR TECHNICAL REFERENCE ONLY
Want a downloadable copy of this datasheet?
Contact our technical team and we will send you the full official PDF directly to your inbox.
Related Products
Explore our range of industrial solvents, detergent chemicals, and cosmetic raw materials tailored for East African industries. Visit /products/industrial-chemicals, /products/detergent-chemicals, and /products/cosmetic-chemicals for more.